Pontiac G8 Forum banner

Vararam Install Problem

4767 Views 2 Replies 3 Participants Last post by  sweetair
VARARAM does not seem to sit properly over rad. I have the front flange resting on ac condenser as specified, rerouted hoses underneath the VR unit and it still won't push down further. Interferes with hood. Any thoughts?
1 - 3 of 3 Posts
Make sure the cooling fan connector is released from the tab on the cooling fan so the radiator will tilt back a bit further.
I had an issue with it sealing well under it. Does yours have a plastic brace keeping the opening open on the bottom. It seems to fit over the radiator well, just all the plastic gets bent/pushed around. Once I was sent one with the plastic bracing all was well.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top