Roto-Fab CAI Question
Hey all. To anyone else that has installed the Roto-Fab CAI did the 3/8" hose that connects to the passenger side valve cover come extremely close to the tensioner/idler pulley when you installed it ? When I initially installed it it was rubbing so I twisted the hose a little and that got it off the pulley but it still made me nervous. I ended up using a zip-tie to get it back about a half inch.
Maybe I routed it wrong but the installation instructions said to route it under the throttle body motor, which is what I did.
If anyone has a pic of the way they routed it it would be much appreciated, just for a comparison.
~ Jerry
|
Linear Mode
